The input is terminated with 75
Ω
internally. To pass on the word clock to other devices,
use the word clock
output
. Do not connect a T-adapter to the word clock input.
The state of an incoming word clock signal can be accessed
in the
CLOCK
section.
Possible States:
• A
green indicator
shows that the signal is currently in sync with the chosen clock master.
• An
orange indicator
means that a word clock is received but is not in sync.
• A
red indicator
means that word clock is chosen as master, but a signal is not present or has a
different sample rate than the chosen one.
3.16. USB 2.0 Type B Jack
The USB jack at the rear of the 12Mic provides an alternative connection method for web remote control
when a network connection is not available.
When connecting the 12Mic with a standard ("printer") USB 2.0 cable to a current Microsoft Windows™ or
Apple macOS™ operating system, a network adapter will be automatically installed. This does not require
additional drivers. The device can then be remotely controlled by opening the URL http://172.20.0.1.
The USB port cannot be used to stream audio signals.
3.17. ADAT Outputs
Three ADAT outputs can be found at the rear of the device.
RME 12Mic User’s Guide
17
| 3.16. USB 2.0 Type B Jack
