9.1.3. Enabling Phantom Power (P48)
Channels with active phantom power are shown on the standby-screen with a yellow square indicator.
To activate phantom power on several channels:
1. While the standby screen shows the input level meters, press and hold the first button next to the
yellow indicator. An instruction is shown on the display and the LEDs next to the input channels
change to off (no phantom power) or yellow (phantom power active).
2. While holding down the button, press the channel buttons next to each input where the phantom
power should be toggled on or off. A yellow LED at the input represents active phantom power.
To activate phantom power on a single channel:
1. Use the button next to the analog input to access its settings.
2. Use the P48 button to toggle phantom power.
Phantom power settings are not shown when the channel is switched to TRS input.
RME 12Mic User’s Guide
9.1. Analog Inputs |
40
