2. Use the button next to
Stream format
3. Rotate the encoder to configure a new stream size and stream format and confirm by pressing the
encoder again.
Changing a stream size briefly interrupts all incoming and outgoing AVB streams.
Changing stream sizes is not possible when streams are connected.
10.5. ADAT Outputs
The ADAT outputs of the 12Mic are always active. On a new device, with preset 1 loaded and not
modified, the analog input channels 1-8 are sent to ADAT port 1, and channels 9-12 are sent to ADAT port
2. The routing to ADAT outputs is saved per port. As a result, changing the sampling rate to double or
quad speed temporarily hides the channels that cannot be transmitted for each output port, but restores
their routing once the sampling rate is reduced in the clock settings.
there are no settings available or necessary for the ADAT outputs.
RME 12Mic User’s Guide
10.5. ADAT Outputs |
54