3.1. Hardware Specifications
RME
12Mic
EAN
42 6012336 329 1
Dimensions
440 x 44 x 243 mm (17.3 x 1.7 x 9.6 inches)
Weight
2.8 kg (6.2 lbs)
Package
560 x 315 x 115 mm (22.1 x 12.4 x 4.5 inches)
Conformity
CE, FCC, WEEE, RoHS
Power supply
internal 30 W 100-240 V AC
external 12 V 2.5 A DC (optional)
Power consumption
typ. 20 W, standby 0.5W
3.2. Package Contents
The package of the 12Mic contains the following items:
• 12Mic
• two rack mount brackets
• four screws for rack mount brackets
• one power cord
• one Cat5e network cable
• printed manual
If any item is missing from a factory-sealed package, please contact support immediately.
3.3. Power On
The 12Mic has a power switch at the AC inlet and a standby switch at the front.
Perform the following steps to power on the 12Mic:
1. Ensure that one of the power inlets is properly connected to a power source.
2. When using the AC inlet, toggle the mains switch at the back of the device to position
I
(
down
). The
power indicator will light up in red (Standby) or white (On). This depends on the state of the device
before it was disconnected from a power source.
3. If the device is in standby mode, hold the encoder for two seconds to boot the device.
The 12Mic features a dark mode which deactivates some or all lights of the front panel.
This can be used to let the device appear powered off when it is in fact powered on. A short
push on the encoder or any button deactivates this mode temporarily.
RME 12Mic User’s Guide
3.1. Hardware Specifications |
8