20
“All” is a quick shooting and recording mode.
The instrument automatically records the point using the default
PtID, and then returns to the basic measurement screen.
“Meas” is the default measuring mode. After a measurement, the instrument stops in the BMS and waits for you
to press [REC/ENT] before recording the point.
※
2) The measurement mode setting of [MSR2] is the same as it. When pressing [MSR1] or [MSR2], the system
activates the corresponding measurement mode to measure.
3.3 HOT KEY
[HOT] Key includes the inputting function of target height, temperature & pressure, target selection and note.
It is available on any observation screen.
3.3.1 Set the Height of the Target
To change the height of the target (HT) or temperature, pressure, press [HOT].
STEP
OPERATION
DISPLAY
a.
Press [HOT] to display the [HOT] key
menu.
[HOT]
HOT Key
1.Input HT
2.Temp&Pres
3.TGT
4.Note
b.
Press [1] to enter into HT setting
function.
[1]
Input HT
HT:
1.800m
Stac
c.
Enter the height of the target manually
or press the [Stac] softkey to display the
HT stack. The HT Stack stores the last
20 HT values entered. As shown in the
right.
Input target
height
or
[Stac]
Input HT
HT:
1.800m
Stac
1.000m
2.000m
3.000m
4.000m
5.000m
