115
c.
Use [▲]/[▼] to move to items that need
to change be changed.
[▲]/[▼]
<Angle>
VA0: Zenith
Min
Ang:
5”
HA: Azimuth
d.
Press [ ]/[ ] to change the settings, and
press [ENT].
[ ]/[ ]
<Angle>
VA0: Zenith
Min
Ang:
5”
HA: 0 to BS
e.
If any of these settings are changed while
a job is open, a confirmation screen
appears, asking you whether to close the
current job.
※
1)
Press [Abrt] to use the settings in current
job and abort the change.
Press [OK] to close the job in measure or
record function, program will ask whether
to select or create a job.
<Angle>
Job set
to be changed
* Close current job?
Abrt
OK
f.
The display returns to Settings menu.
Settings
1.Angle
6.So
2.Dist
7.Unit
3.XYZ
8.Record
4.Power
9.Other
5.Comm
※
1) About the setting of twelve items, see“11.1.2 Creating a New Job”.
In the following form, the items in
can’t be changed once a job is created.
Item
options
Angle
VA0: Zenith/Vertical/Vert± 90
Min. Ang:
1″/5″/10″
HA: Azimuth/0 to BS
When this field is set to Azimuth, the horizontal angle (HA) that is displayed and recorded
is in Azimuth value.
When this field is set to 0 to BS, HA is in HA zero to BS value.
Scale: Numeric value between 0.990000 and 1.010000
T-P crn: ON/OFF
