RLE Technologies WiNG-MGR v2 User Manual Download Page 3

Page: 3 / 94

rletech.com

WiNG-MGR v2 User Guide

Manufacturer’s Notes

This product is manufactured by RLE Technologies, 104 Racquette Drive, Fort Collins, CO, 80524.

If this product is used in any manner other than that specified by the manufacturer, the protection

provided by the equipment may be impaired.

Product Warranty

Warranty information for RLE products can be found at www.rletech.com.

Product Registration

Product registration helps RLE Technologies inform owners of:

•

Product upgrades

•

Firmware enhancements

•

New products and technologies

•

Special offers available only to registered users

Any information provided to RLE Technologies through the registration form will be regarded as

confidential. RLE will not sell or distribute any of the information to third parties. To read our Privacy

Policy, please visit our website:

rletech.com

Technical Support

Personal assistance is available Monday through Friday, from 8:00 a.m. to 5:00 p.m. MST.

A request for assistance may be sent to

[email protected]

Otherwise, please call us directly at:

800-518-1519

The following information is located on the bottom of each WiNG-MGR unit. Please have this

information available whenever a technical support call is placed:

The WiNG-MGR is not a field-serviceable item and must be sent back to RLE Technologies for

mechanical repair. Only RLE certified service personnel is allowed to access the interior of this

equipment, and power must be disconnected (unplugged) from the WiNG-MGR any time the unit is

mechanically serviced. Physically unplug power from the unit any time you are making wiring

connections to or from the WiNG-MGR.

RLE cannot accept an item for repair without a Return Materials Authorization number, which must be

provided by RLE.

Product Model Number
Product Serial Number
Product Manufacture Date

Summary of Contents for WiNG-MGR v2































































































Search results

Summary of Contents for WiNG-MGR v2

Reviews:

Related manuals for WiNG-MGR v2

Brands by name

Popular brands

RLE Technologies WiNG-MGR v2, User Manual

Search results

Summary of Contents for WiNG-MGR v2

Reviews:

Related manuals for WiNG-MGR v2

Brands by name

Popular brands