86 • Chapter 7: Changing GX-3R (Pro) Parameters
User Mode 1 Sub Tab
Backlight Time(Sec)
The
Backlight Time
is how long the backlight stays on after the last button push. It can be set
anywhere from
0
to
255
seconds or
OFF
. The factory setting is
30
seconds. Use the arrows to the right
of the value to make your selection or highlight the existing value and enter the desired value.
Beep Time(Min)
The
Beep Time(Min)
parameter defines how often the confirmation alert or non-compliance indicator
occurs. It can be set at any time but it only applies if the
Beep Select
parameter is set to something
other than
OFF
. The available choices are
0.5
minutes and
1
-
99
minutes in 1 minute increments. The
factory setting is
5
minutes.
Figure 51: Parameter Tab, User Mode 1 Sub Tab
