Replacing SteelConnect SDI-2030 and SDI-5030 Gateway Components | 31
Replacing memory modules
Replacing memory modules
illustrates the memory module slot locations.
Figure 3-12. Memory module slot locations
In the SDI-2030 the DIMM slots E1, E2, E3,G1, G2, and G3 are empty as there is no CPU in socket 2.
Figure 3-13. SDI-2030 empty CPU 2 socket and empty DIMM slots
When adding new memory to the gateway, add the memory in the blue slots first. Once the blue slots
are full, populate the black slots. Use the lowest lettered and numbered slots first.
To replace a memory module in the gateway
1. Power down the gateway.
2. Remove the chassis cover.
See
“Removing and installing the chassis cover” on page 26
.
3. Remove the air duct.
See
“To remove and install the air duct” on page 27
.