8 | SteelConnect SDI-2030 and SDI-5030 Gateway Overview
SteelConnect SDI-2030 and SDI-5030 gateway LEDs
Figure 1-2. Rear panel
Figure 1-3. Rear port numbers
This table describes the components on the rear panel.
SteelConnect SDI-2030 and SDI-5030 gateway LEDs
This section describes the LEDs for the SteelConnect SDI-2030 and SDI-5030 gateways.
Components
Description
Power supply 1 and 2
Supplies power to the gateway.
Riser-card slot 1
PCIe expansion slot.
Riser-card slot 2
Not configurable.
VGA
DB15 access port used for video connectivity.
Serial
RJ45 access port for communication input and output.
USB
Three stacked ports that are 2.0 and 3.0 compatible.
Ports 1 to 4 (SDI-5030)
Preinstalled with Four-Port 1-GbE Copper Base-T NIC.
Port 1 reserved for SCM communication; port 2 reserved for cluster
communication. The remaining ports are general purpose.
Ports 1 to 4 (SDI-2030)
Preinstalled with Four-Port 1-GbE Copper Base-T NIC.
Upon bootstrap, port 1 reserved for high availability (HA) and all
remaining ports are used as uplinks. After the appliance establishes
communication with SCM, any port can be used as either an HA
port or an uplink (WAN) port.
Ports 5 and 6
Support for 10-GbE NICs.
Ports 7 to 10
Support for additional NICs.
