SteelConnect SDI-2030 and SDI-5030 Gateway Overview | 11
SteelConnect SDI-2030 and SDI-5030 gateway LEDs
SteelConnect SDI-2030 and SDI-5030 gateway back panel LEDs
Figure 1-5. Back panel LEDs
Figure 1-6. Port 5 and port 6 LEDs
This table describes the LEDs for ports 1 to 4 on the rear panel of the SDI-2030 and SDI-5030 gateways.
Power supply LED
state
Description
Green
Power on.
Off
No AC power to all power supplies.
1 Hz blinking green
Standby AC present (only 12 VSB or power supply in cold redundant state).
Amber
Power supply critical event causing a shutdown; failure OCP, OVP, fan fail.
1 Hz blinking amber
Power supply warning (possible high temperature, high power, high current, slow fan).
2 Hz blinking green
Power supply firmware updating.
Port 5 and 6 LEDs
State
Description
Left LED
Green
Link is up.
Blinking green
Activity.
Right LED
No light (with green left LED)
100 Mbps data rate.
Green
1000 Mbps data rate.
Yellow
10 GbE data rate.
Four-port 1-GbE copper LEDs
State
Description
Speed/Disconnect
(Top left)
Yellow
1000 Mbps
Green
100 Mbps
Off
10 Mbps
Link/Activity
(Top right)
Green
Link
Blinking green
Activity
