7 Technical specifications
40
Rittal Perforex BC machining centre
EN
Note:
The values shown here are emission values, thus they must not necessarily
also represent safe workplace values. Because there is no correlation be-
tween emission values and workplace values, they cannot be used reliably
to determine whether further previsions may be required. Factors that can
affect the current workplace value contain the duration of the effect, the
characteristic of the workspace, other noise sources, other machines and
other neighbouring effects. In any case, the permitted workplace values can
vary from country to country. This information, however, should allow the
user to better assess the danger and risk.
The operating personnel must be informed about the noise emissions to be
expected during machine operation.
