Riso MZ1070, Technical Manual, Page: 72 / 150

[ 15-38 ] MZ870 / MZ890 / MZ1070 / MZ1090 (Revision 0.9)
TEST MODE
No. Data setting
Print drum
changeover
0951
Ink Color Code
B
Description Sets the color of ink to be set in the print drum (data stored in print drum PCB).
Setting
Setting range:
0 (Not specified)
64 (Black)
67 (Blue3)
70 (Red2)
73 (Green)
76 (Yellow)
79 (Brown2)
82 (Gray)
85 (Light gray2)
88 (Gold)
91 (Silver2)
94 (Special color)
Default: 0 (Not specified)
65 (Blue)
68 (Blue4)
71 (Red3)
74 (Green2)
77 (Yellow2)
80 (Purple)
83 (Gray2)
86 (Orange)
89 (Gold2)
92 (Pink)
66 (Blue2)
69 (Red)
72 (Red4)
75 (Green3)
78 (Brown)
81 (Purple2)
84 (Light gray)
87 (Orange2)
90 (Silver)
93 (Pink2)
0955
Print Drum Insertion Angle Fine Adjustment
B
Description
This adjustment is performed if the print drum cannot be inserted even after
making the adjustment in Test Mode No. 942 (Print-drum Position-B adjustment)
(data stored in print drum PCB).
* The position-B positioning operation is based on a value equal to the sum of the
values in Test Mode No. 942 and No. 955. This value is between –40 and +40.
The same value also applies when the print drum does engage.
Setting
Setting range: –40 to +40 (–4.0° to +4.0°)
Setting unit: 1 (0.1°)
Default: 0 (0°)
0956
Automatic Print Position Reset Condition Setting
–
Description
Selects the condition for automatic print position reset after master-making or
renewal.
* After automatic reset, a proof copy is output and the TC count is incremented.
* In dual-color printing, an automatic reset is performed after master-making by
both print drums, and a proof copy is output.
Setting
Setting range:
0 (No automatic reset) * Remains at center after master-making/renewal
1 (Automatic reset only after master renewal)
2 (Automatic reset after master-making and renewal)
Default: 1 (Automatic reset only after master renewal)
0959
Master Loading Drum Angle Compensation
B
Description
Compensates the Position-A of the print drum at the start of the master loading
on the drum.
Setting
Setting range: +80 to -80 (+8.0° to -8.0°)
Setting unit: 1 (0.1°)
Default:
MZ8 A3/Ledger machine = No.1 drum: -30 No.2 drum: 0
MZ8 B4 machine = No.1 drum: -20 No.2 drum: 0
MZ10 all machines = No.1 drum: -50 No.2 drum: 0