manualshive.com logo in svg

Riso MZ1070, Technical Manual, Page: 134 / 150

Share
Download
Riso MZ1070 Technical Manual Download Page 134

[ 16-100 ]

MZ870 / MZ890 / MZ1070 / MZ1090

 (Revision 0.9)

PANEL MESSAGE

Error type

F32 [Storage memory: No space available]

Panel display

F32-*** 

!! The Data Storage Area 

has Become Full !! 

Clear Old Storage Data

Error reset 

method

Press the Reset key. (Check the available capacity.)

Error point

Error detecting condition

713

Inadequate storage memory during data write.

Error type

F33 [Storage memory: No space available]

Panel display

F33-*** 

!! The file size is too large

 

to store on USB flash drive !!

 

Change the USB flash drive

 

or delete some files

 

to make spaces

Error reset 

method

Touch the [Cancel] key, or press the Reset or Stop key.

Error point

Error detecting condition

913

Inadequate USB flash drive memory during data write.

Error type

F37 [Combined use of book mode and AF not possible]

Panel display

F37-*** 

!! Book Shadow Editor 

is Not Available 

with ADF !! 

Place Original on 

Stage Glass

Error reset 

method

Press the Close button.

Error point

Error detecting condition

050

With book mode set, an original was found on the AF at the start of the master-making operation.

Error type

F43 [DtoP original/paper incompatibility]

Panel display

F43-*** 

!! Unmatched Size--  

Current Page and  

Printing Paper !!  

Check Paper Size

Error reset 

method

Press the Continue button or Stop button. (Check print paper size.)

Error point

Error detecting condition

902

Paper and original sizes do not correspond at the start of DtoP master-making.

Summary of Contents for MZ1070























































































































































Reviews:

No comments