Riso MZ1070, Technical Manual, Page: 63 / 150

[ 15-29 ] MZ870 / MZ890 / MZ1070 / MZ1090 (Revision 0.9)
TEST MODE
No. Data setting
Print drum
changeover
0741
Paper-feed-clutch ON angle
–
Description Sets the activation angle for the paper feed clutch.
Setting
Setting range: –200 to +200 (–20.0° to +20.0°)
* (<+> for slower ON timing)
Setting unit: 5 (0.5°)
Default: 0 (0°)
0742
Paper-feed-clutch OFF angle
–
Description
Sets the deactivation angle for the paper feed clutch when the paper type is
normal.
Setting
Setting range: –200 to +200 (–20.0° to +20.0°)
* (<+> for slower OFF timing)
Setting unit: 5 (0.5°)
Default: 0 (0°)
0744
Paper Feed Clutch OFF Angle (card)
–
Description
Sets the deactivation angle for the paper feed clutch when the paper type is
<CARD>.
Setting
Setting range: –200 to +200 (–20.0° to +20.0°)
* (<+> for slower OFF timing)
Setting unit: 5 (0.5°)
Default: 0 (0°)
0749
FP Paper Feed Clutch ON Angle
–
Description Sets the activation angle for the paper feed clutch for proof print.
Setting
Setting range: –100 to +100 (–10.0° to +10.0°) * <+> for slower ON timing
Setting unit: 5 (0.5°)
Default: 0 (0°)
0750
Paper feed reverse-rotation prevention solenoid Activate/Deactivate selection.
–
Description Activates or Deactivates the Paper feed reverse-rotation prevention solenoid.
Setting
Setting range: 0: Deactivates the solenoid. 1: Activates the solenoid.
Default: 1: Activates the solenoid.
<Paper Feed Pressure Lever must be selected to Card to activate the solenoid.>
0751
Paper feed jam detection angle. (Paper IN)
–
Description Sets the detection angle for paper feed jam (paper feed IN).
Setting
Setting range: –200 to +200 (–20.0° to +20.0°)
* <+> for slower detection timing
Setting unit: 5 (0.5°)
Default: 0 (0°)
0752
Paper feed jam detection angle. (Paper OUT)
–
Description Sets the detection angle for paper feed jam (paper feed OUT).
Setting
Setting range: –200 to +200 (–20.0° to +20.0°) * <+> for slower detection
timing
Setting unit: 5 (0.5°)
Default: 0 (0°)
0753
Paper receiving jam detection angle. (Paper IN)
–
Description Sets the detection angle for paper ejection jam (paper ejection IN).
Setting
Setting range: –500 to +500 (–50.0° to +50.0°) * (<+> for slower detection
timing)
Setting unit: 5 (0.5°)
Default: 0 (0°)