Riso MZ1070, Technical Manual, Page: 115 / 150

[ 16-81 ] MZ870 / MZ890 / MZ1070 / MZ1090 (Revision 0.9)
PANEL MESSAGE
Error type A10 [AF original feed error]
Error point Error detecting condition
102
Original jam error resulting from pulled-out original.
- The original IN sensor switched OFF while the original registration sensor and the original IN sensor were
ON during scanning.
- The original ejection sensor switched OFF before completion of scanning (prior to SIG_C output).
- The original registration sensor switched OFF from the time of completion of leading edge insertion
operation to the time of scanning start.
* Error issued from AF.
103
Original jam at the AF registration sensor (extra-long paper error).
Simplex AF: The original registration sensor fails to switch OFF after the original IN sensor switched ON.
Duplex AF: AF registration sensor did not go OFF after the original started to feed.
* Error issued from AF.
105
Original jam at the original IN sensor
The original IN sensor fails to switch OFF after the original registration sensor switched OFF (max:
movement of 84 mm).
* Error issued from AF.
106
Original jam at the original OUT sensor
Simplex AF: The original OUT sensor fails to switch OFF after the original IN sensor switched OFF.
Duplex AF: The original OUT sensor fails to switch OFF after the original registration sensor switched
OFF.
* Error issued from AF.
107
Original registration sensor non-arrival jam
Original fails to reach the original registration sensor after the feed operation started.
* Error issued from AF.
108
Original IN sensor non-arrival jam
Original fails to reach the original IN sensor after the scanning operation started (max.: movement of 42
mm).
* Error issued from AF.
109
Original OUT sensor non-arrival jam
Simplex AF: Original fails to reach the original OUT sensor after the original IN sensor switched ON.
Duplex AF: Oiginal fails to reach the original OUT sensor after the original started to feed.
* Error issued from AF.
169
Original jammed in the AF unit due to the reason that the AF unit was opened during the operation.
178
Original flipper sensor non-arrival jam
Original fails to reach the Original flipper sensor after the original was fed.
* Only on Duplex AF.
179
Original jam at the original flipper sensor.
Original flipper sensor fails to switch OFF after the original was fed.
* Only on Duplex AF.
180
Gap between the originals not constant.
* Only on Duplex AF.
Error type A25 [Central transport error]
Error point Error detecting condition
419
The central transport sensor was ON at the start of the operation.
441
The central transport sensor was ON at the timing the paper should have left the central transport sensor
(central transport error).
447
The paper ejection sensor did not detect the paper at the timing when the paper should have arrived, and
when the machine stops, the central transport sensor was ON (central transport error).
455
Central transport error (during the recovery movement).
Error type A48 [Paper jam] (Drum No. 2)
Error point Error detecting condition
410
The paper ejection sensor was OFF at the timing when the paper should have arrived to the sensor and
when the machine stopped, the central transport sensor was OFF. (Paper jammed on Drum No.2)