manualshive.com logo in svg

Riso MZ1070, Technical Manual, Page: 135 / 150

Share
Download
Riso MZ1070 Technical Manual Download Page 135

[ 16-101 ]

MZ870 / MZ890 / MZ1070 / MZ1090

 (Revision 0.9)

PANEL MESSAGE

Error type

F44 [Auto size reproduction disabled (exceeds original size detection range)]

Panel display

F44-*** 

!! No Auto Reproduction 

with This Original 

and Printing Paper !! 

Select Size Manually

Error reset 

method

Touch the [Cancel] key, or press the Reset or Stop key. (Manually enter the size reproduction setting.)

Error point

Error detecting condition

901

The original size detection failed. (The original did not conform to the detection specification.)

Error type

F45 [Presence of original unknown/no original]

Panel display

F45-*** 

Original Undetected 

Reset Original

Error reset 

method

Reset the original. Press the Continue button or Stop button.

Error point

Error detecting condition

954

Master-making operation or RLP output was executed with the auto tray or auto size reproduction setting 

set to ON, and the presence of an original could not be detected.

959

Master-making operation or RLP output was executed without an original.

981

When the Next button was clicked on the multi-up count entry screen of Multi-up Wizard, no original was 

detected.

Error type

F46 [Print drum color not matching with DtoP job color]   (Drum No. 1)

Panel display

F46-*** 

!! Unmatched Color -- 

Data Color and 

Cylinder Color 1 !! 

Change Print Cylinder 

Color: (Color name)

Error reset 

method

Press the Reset key or the Continue button. (Replace the print drum.)

Error point

Error detecting condition

903

The color of the print drum fails to match between the color specified for DtoP job and the color set for the 

specified print mode.

Error type

F47 [Combined use of AF and postcard size reproduction not possible]

Panel display

F47-*** 

[A4->Card] Reproduction 

is Not Available 

in combination with ADF 

Place Original on 

Stage Glass

Error reset 

method

Remove the original from the AF and press the Close button.

Error point

Error detecting condition

904

Master-making operation or RLP output was performed with <A4 to Postcard> size reproduction selected 

and original set on the AF.

Summary of Contents for MZ1070























































































































































Reviews:

No comments