Chapter 7. Setting Guide for each Configuration
7.4.3
Serial Settings
After clicking Serial Settings among the Set Menus, set values as shown in
and then
click the [Submit] button.
Figure 7-25. Ad-Hoc Mode Serial Settings
1. Set Interface to
RS232.
y
Select a kind of the serial interface of the device to be connected to the WiComm-1.
2. Set Operation Mode to
COM Port(Win200x/XP).
y
Select the corresponding OS in the setting.
3. Set Local Socket Port to
4001.
4. Set Baud Rate to
9600bps.
5. Set Data Bits to
8Bit.
6. Set Stop Bits to 1
Bit.
7. Set Parity to
None.
8. Set Flow Control to
None.
9. Set Device Type to
Data Only.
10. Set MTU to ‘
1’.
7-25
