Chapter 7. Setting Guide for each Configuration
7.3.10
Operation Test
If the settings of the Server WiComm-1 and the Client WiComm-1 are completed in the above sequence and are
rebooted, access the Web server of the Server WiComm-1. (Execute a web browser on a PC and enter 10.10.1.1 in
the address bar to log in to the web server.) If the web server is connected with a Client WiComm-1 through a
wireless LAN, No Connection is displayed in the Access Point column on the Wireless Status box. The Link Quality
value indicates the wireless sensitivity for the client. Check if the channel is the same as that of the Client WiComm-
1.
If the above checkpoints are satisfied, the connection between the Server WiComm-1 and the Client WiComm-1
can be considered as ‘normal’,
Note
If the value of the Access Point is
No Connection
, it indicates the connection is failed.
Figure 7-21. Checking the Access in Ad-Hoc Mode
If the connection was normally performed, test if data are exchanged normally after opening the serial ports of the
server WiComm-1 and the Client WiComm-1 by using a HyperTerminal, which is a communication program.
In another way, open the COM port in the Server WiComm-1 and test the Loopback for the serial port of the Client
WiComm-1. If the returned data as a result of the Loopback are displayed on the HyperTerminal window, the
connection is normal.
7-21
