Chapter 6. Setting via Telnet
6.2 Setup Commands
The basic Setup commands and functions are listed in the table below:
Table 6-1. Basic Setup Commands
Command
Description
setup view
Check WiComm-1 summary.
setup nw
Check network settings and system information.
setup serial
Check the serial port information.
setup wlan
Check the wireless network settings.
setup admin
Set the system name and the support information.
setup passwd
Change the password.
setup update
Update the firmware.
setup factory
Initialize into the factory setting.
setup save
Save the changed settings.
setup reboot
Restart the system.
setup mac
Enter the MAC address of the system.
6-2
