Chapter 7. Setting Guide for each Configuration
7.3.7
Serial Settings (Client)
After clicking Serial Settings among the Set Menus, set values as shown in
Figure 7-18. Ad-Hoc Mode Serial
and then
click the [Submit] button.
Figure 7-18. Ad-Hoc Mode Serial Settings(Client)
1. Set Interface to
RS232.
2. Set Operation Mode to
TCP Client.
3. Set Local Socket Port to
4001.
4. Set Baud Rate to
9600bps.
5. Set Data Bits to
8-Bit.
6. Set Stop Bits to 1
Bit.
7. Set Parity to
None.
8. Set Flow Control to
None.
9. Set Device Type to
Data Only.
10. Set the remote IP address/port to
192.168.1.71,
which is the IP address of the Server WiComm-1 and set Port to
4001, which is the port number of the Server WiComm-1.
11. Set MTU to ‘
1’.
7-18
