manualshive.com logo in svg

Risco ProSYS 128, Programming Manual

The Risco ProSYS 128 is a powerful security system equipped with advanced features for comprehensive protection. Unlock the full potential of this product by accessing the detailed Programming Manual available for free download at manualshive.com. Ensure seamless installation and effortless customization with this comprehensive manual.

Share
Download
background image

 

ProSYS Installation and Programming Manual

 129 

Dialer: Report Split 

Quick Keys 

Parameter 

Default

   

[10] 

Phone Trouble 
Restore 

N 

[11] 

GSM Low 
Battery Restore 

N 

[12] 

GSM Trouble 

N (Restore of all GSM module faults) 

[13] 

Siren Low 
Battery Restore 

N 

2. After you have defined all the required phone events, press 

/ 

. 

55

 

77

 

55

 

E-mail 

To enable event reporting using the ACM, the following parameters should 
be defined: 

[1] Mail IP Address: The IP address of the ACM mail server. 

[2] Mail SMTP PRT: The port address of the ACM SMTP mail server port, 
used to send messages. 

[3] Mail POP3 PRT: The port address of the ACM POP3 mail server port, 
used to retrieve e-mails. 

[4] E-mail Prefix: The ACM email address prefix; 16 characters are used to 
define the ACM email prefix (for example in the [email protected] e-
mail address, the prefix name is “ACM”). 

[5] E-mail Domain: The ACM email address domain name, which identifies 
the web server of the ACM. For example, in the email address 
[email protected], the domain name is riscogroup.com. (Do not enter 
the @ sign.) 

 

[6] SMTP User Name: A parameter that defines the user name that the 
SMTP server requires for authentication when defined as such by the IT 
department. Up to 21 characters can be used.   

[7] SMTP Password: A parameter that defines the password that the SMTP 
server requires for authentication when defined as such by the IT 
department. Up to 21 characters can be used.   

55

 

77

 

66

 

Event Log 

The ACM will enable storing of unlimited amount of events over Ethernet 
resources, which can be used for backup and analysis. 

[1] Enable 

[2] E-Log IP Address 

[3] E-log Port 

Summary of Contents for ProSYS 128









































































































































































































































Reviews:

No comments

Related manuals for ProSYS 128

ZEHUS Controller Rider'S Manual preview
Controller
Brand: ZEHUS Pages: 28
Valfonta S3 Operation And Installation Instructions Manual preview
S3
Brand: Valfonta Pages: 12
VADDIO EVI-D70 Installation And User Manual preview
EVI-D70
Brand: VADDIO Pages: 2
ZIMO MX10 Instruction Manual preview
MX10
Brand: ZIMO Pages: 38
Dahua NKB User Manual preview
NKB
Brand: Dahua Pages: 58
Salda FLEX Service Manual preview
FLEX
Brand: Salda Pages: 20
Samson 3354 Mounting And Operating Instructions preview
3354
Brand: Samson Pages: 40
Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST Instruction Manual preview
GRAVIMETRIC AUGER FEEDER MGF-ST
Brand: Maguire Products Pages: 47
Magtrol DSP7000 User Manual preview
DSP7000
Brand: Magtrol Pages: 160
YASKAWA PROFINET V1000 Technical Manual preview
PROFINET V1000
Brand: YASKAWA Pages: 49
M-system MSP10 Instruction Manual preview
MSP10
Brand: M-system Pages: 17
Kampmann 197901960988 Manual preview
197901960988
Brand: Kampmann Pages: 5
Quickie DX2-REM550 User Manual preview
DX2-REM550
Brand: Quickie Pages: 64
Kamstrup 66-0F-000-100 Installation Manual preview
66-0F-000-100
Brand: Kamstrup Pages: 7
AGRI TRONIX DIGI-STAR GT400 Operator'S Manual preview
DIGI-STAR GT400
Brand: AGRI TRONIX Pages: 26
Dewetron DAQP-CHARGE-B Series Technical Reference Manual preview
DAQP-CHARGE-B Series
Brand: Dewetron Pages: 14
Universal Remote Control PHAZR-5 UR5U-9000 Operating Instructions preview
PHAZR-5 UR5U-9000
Brand: Universal Remote Control Pages: 2
Universal Remote Control GDRC-DTA2 User Manual preview
GDRC-DTA2
Brand: Universal Remote Control Pages: 5

Brands by name

Popular brands

Load more brands