170
ProSYS Installation and Programming Manual
The system displays each programmed device and its address.
Walk Testing
Comprehensive Walk Testing is an important part of system maintenance. It should be
performed after installation and periodically afterwards by both the dealer and the customer.
When conducted within the User Functions mode, Walk Testing permits any of the ProSYS
keypads whose "Local Buzzers" have been enabled under User Functions (refer to the
ProSYS User's Manual
) to briefly sound all zones violated during the test. On completion, use
the keypad's
/
or
/
keys to scroll through the list of the zones
logged during the test.
77
55
Accessories: Auto Settings
The Auto Settings menu enables you to perform automatic setting of the accessories
connected to the system by using the BUS scanning feature. This process also runs
automatically when the system is defaulted and the AC power is turned on (refer to the
Accessing the Installer Programming Menu
section of
Chapter 4, Programming the ProSYS
for additional details).
To access the Auto Settings menu:
1
Access the Accessories menu, as described on page 154.
2
From the Accessories menu, press
[5]
to access the Auto Settings Install menu.
The Auto Settings process runs the BUS scanning. (Refer also to
Accessories: BUS
Scanning
, page 169.)
A list of the accessories that were found is displayed with the data definition that is
required for each one.
3
View each accessory in the list, add/change parameters, as required, and press
/
after each one to approve and save the accessory.