Rion VM-83, Instruction Manual, Page: 59 / 106

49
Serial Interface
Preparations
1. Turn power to the VM-83 and the computer off.
2. Use a generic cable to connect the serial interface connector on the
rear panel of the VM-83 to the computer.
Cable : Generic cross-wired serial cable
(null modem)
Connector type on VM-83 : 9-pin D-sub, male
3. Set the power switch of the VM-83 to ON.
4. Make the required menu settings at the VM-83.
For details, please refer to “Menu Settings” on page 27.
Menu 0-1
Menu 1-96 or 1-19 Set transfer rate.
Menu 2- Set ID number.