Rion VM-83, Instruction Manual, Page: 27 / 106

17
Preparations
Setting the INPUT SELECT switch
Set the INPUT SELECT switch as required for the type of input that is being
used.
PREAMP 2
SERVO(LS-10C)
SERIAL COMP OUT
PREAMP 1
PICKUP
SERVO
SERVO
PREAMP 2
A COM
DC OUT
INPUT SELECT
EXT 6V
INPUT SELECT switch
PICKUP : Signal from Accelerometer input connector on front panel
PREAMP1 : Signal from PREAMP 1 connector on rear panel
PREAMP2 : Signal from PREAMP 2 connector on rear panel
SERVO : Signal from SERVO connector on rear panel. Servo ac-
celerometer set to vertical axis.
SERVO : Signal from SERVO connector on rear panel. Servo ac-
celerometer set to horizontal axis.
Note
During calibration, comparator operation, maximum
hold and peak hold, changing the setting of the IN-
PUT SELECT switch has no effect.