Rion VM-83, Instruction Manual, Page: 19 / 106

9
Controls and Features
Units indicator
The unit applicable to the current measurement mode is shown here.
m/s 2 When a piezoelectric accelerometer is used, this indicator
appears during acceleration measurement.
mm/s 2 When a servo accelerometer is used, this indicator appears
during acceleration measurement.
mm/s This indicator appears during velocity measurement.
mm This indicator appears during displacement measurement.
pC/(m/s 2 ) This indicator appears during sensitivity setting for the
piezoelectric accelerometer.
Low-pass fi lter indicator
Shows the low-pass fi lter setting.
High-pass fi lter indicator
Shows the high-pass fi lter setting.
RMS/
EQ
PEAK/
EQ
P-P indicators
Shows the display (detection) characteristics setting.
Measurement value
Shows the current measurement value, maximum hold value, peak hold
value, menu settings, etc.
PEAK/MAX HOLD/OVER indicators
When the maximum hold function has been activated, the MAX HOLD
indicator is displayed (see page 33).
When the peak hold function has been activated, the PEAK HOLD indi-
cator is displayed (see page 36).
When the hold value has exceeded the measurement maximum, the OVER
indicator is displayed.
Bar graph
When the level range setting is 10000, 1000, 100, 10, 1, 0.1, or 0.01, the
indication follows the upper scale: 0, 2, 4, 6, 8, 10.
When the level range setting is 3000, 300, 30, 3, 0.3, 0.03, or 0.003, the
indication follows the lower scale: 0, 1, 2, 3.
The bar graph indication corresponds to the input level.