Rion VM-83, Instruction Manual, Page: 30 / 106

20
Measurement
Power-on
When the unit is turned on, the same settings as used before the unit was
turned off are reestablished ( resume function), and measurement starts. The
level range, high-pass fi lter setting, low-pass fi lter setting, and display char-
acteristics are memorized for each measurement mode.
Settings memorized by
resume function
Settings reset at regular
vibration measurement start*
Measurement mode CAL status
Level range Maximum value hold
Display characteristics Peak hold
High-pass fi lter Backlight status
Low-pass fi lter Sensitivity setting status
Sensitivity MENU setting status
MENU0 to MENU2 item settings Comparator status
MENU4 to MENU8 item settings Remote status
* These measurement conditions are not memorized by the resume
function. They will be reset to the default vibration measurement
condition when the unit is turned on.
Note
Settings made via the serial interface are not mem-
orized for the resume function.