Rion DA-21 Instruction Manual Download

Page: 7 / 172

Important

Check the install CD before installation

Before inserting the supplied viewer software install CD in the CD-ROM

drive of a computer, be sure to visually check the disc. If there are any cracks

or scratches or if the disc is deformed, do not insert the disc in the CD-ROM

drive. Otherwise there is a risk of damage to the CD-ROM drive.

Handle batteries correctly

If batteries are inserted with wrong polarity or otherwise mishandled, battery

fl uid may leak and overheating may occur.

Do not apply excessive voltage

Make sure that voltage applied to the power supply connector (DC IN), to the

Input connectors, and to the external trigger (Ext. Trig.) connector does not

exceed the specifi ed values. Otherwise there is a risk of damage to the unit.

Summary of Contents for DA-21













































































































































































Search results

Summary of Contents for DA-21

Reviews:

Related manuals for DA-21

Brands by name

Popular brands

Rion DA-21, Instruction Manual

Search results

Summary of Contents for DA-21

Reviews:

Related manuals for DA-21

Brands by name

Popular brands