32
Menu Operations and Setting Items
6. Detailed explanation of methods A, B, C
A: Select setting item on sub menu
Sub menu
The sub menu appears when the [ENT] key is pressed. Select the
setting from the sub menu. The following setting items have this
type of sub menu.
<Input>
(Sensor signal type, High pass fi lter, Low pass fi lter,
Sensor type)
<Rec.Parameters>
(Frequency Range, Sampling Frequency, etc.)
<Trigger>
(Trigger Mode, Trigger Type, etc.)
<Bar Graph> Bar Graph Display Type
<System>
(Play Signal Output, Backlight Brightness, etc.)
<Synchronization>
(Master or slave selection)
The explanation below uses the channel 3 LPF setting on the <Input>
menu as an example. The procedure is the same for other items.
A-1 Use the [
]/[
] keys to move the cursor in the sub menu to
the desired setting.
ENT
Select setting
Summary of Contents for DA-21
Page 2: ......
Page 172: ...No 59374 16 07...
