Rion DA-21 Instruction Manual Download

Page: 125 / 172

113

Recall/Playback of Recorded Data

Performing fast forward or reverse during playback

Press and hold the [>]/[<] keys.

While you press the [>] or [<] key, the playback position

is moved quickly forwards or backwards. During this

time, no playback signal is output. If the playback position

was moved all the way to the end of the recorded data,

playback will stop when you release the [>] key. If the

playback position was moved all the way to the beginning

of the recorded data, playback will start when you release

the [<] key.

The speed of fast forward or reverse is about 4 times higher

than regular playback.

ENT

Press key

Release key

Fast forward or reverse occurs while [>] or [<] key is pressed

Summary of Contents for DA-21













































































































































































Search results

Summary of Contents for DA-21

Reviews:

Related manuals for DA-21

Brands by name

Popular brands

Rion DA-21, Instruction Manual

Search results

Summary of Contents for DA-21

Reviews:

Related manuals for DA-21

Brands by name

Popular brands