41
Filter cleaning lamp
The fi lter cleaning lamp lights or blinks when too much lint has accumulated on the lint fi lter. This increases the drying time
or may cause the inside of the equipment to overheat. So, be sure to clean the lint fi lter after drying ends.
When the fi lter cleaning lamp lights during drying operation, the buzzer sounds after operation ends. (When the front door
is opened, the buzzer stops, and the lamp goes out.)
During operation
Lights (red)
After end of operation
Blinking (red)
10 short continuous beeps
Before performing daily maintenance, allow the equipment to cool down,
close the gas cock, remove the power plug, and put on gloves.
Maintenance Methods
