22
SOFTEN&COOL lamp (green)
Air is blown into the drum while
it is operated intermittently
(drum is rotated for one minute
approximately every four minutes)
together with cool operation after
drying ends. This makes it less likely
for wrinkles to occur, and keeps
clothes fl uff y during drying. During
cool operation, this lamp lights
(green).
*
To immediately stop cool
operation, perform the following:
1. Press the “Start / Pause”
switch to stop operation.
2. Open the front door, and be
sure to remove the clothes.
3. With the front door open, hold
down the “Power” switch until
you hear a beep.
(See pages 29 .)
This lights to notify you when too much lint
has accumulated on the lint fi lter inside the
equipment. When this lamp is lit (red) or is
blinking, perform maintenance on the lint fi lter.
(See page 41.)
Filter cleaning lamp (red)
Lamp indications
(lit green) In operation
(lit red) Gas burning in
progress
(blinking green) Paused
(See pages 28, 32 and 34.)
Operation/combustion
lamp (green/red)
Start/pause operation.
“Start / Pause” switch
This turns the power ON
and OFF.
If the power is left ON, it is
automatically turned OFF
after approximately ten
minutes. (auto off )
“Power” Switch
This is used to switch the operation course.
• Each press switches the course.
(See page 28.)
Course selection switch/lamp (green)
