Warning:
Improper use of the AC/DC adaptor may cause malfunction of the units. Please consult
your dealer for any queries. Use only the AC/DC adaptors supplied in the packaging.
The monitor of your Wireless Monitor has a built-in recharging circuit. Before plugging
in the AC/DC adaptor, please make sure only approved Li-ion rechargeable battery (or
no battery) is inside the battery compartment.
OPERATING INSTRUCTIONS
To turn ON the camera unit, press the Power ON/OFF switch (1) located in the front
of the unit for about 1 second.
Automatic Infra-red Night Vision (7)
The infra-red night vision of the camera is designed to allow the camera to pick
up pictures at darkness or during periods of very low light level.
In this mode, only black and white image can be seen on the monitor and only
objects placed within 6ft/2m will be monitored.
The camera constantly monitors the light level by the Light Sensor (7) and
switches to the infra-red mode automatically whenever there is insufficient light for
normal vision so that you don’t need to risk disturbing your sleeping child.
Turning Circle to Adjust Viewing Angle (8)(9) /
Wall Mounting (10)
The camera is featured with easily adjusted viewing angle. The outer and inner
turning circles (8)(9) can be used to adjust different viewing angles to view your baby
or the secured area. It can also be hanged onto wall for flexible monitoring.
High/Low Transmission (12)
When it is switched to the HI position, it can reach 300m in open field with its original
transmitting power. Whereas it is switched to the LOW position, the transmitting
distance is about 150m in open field
.
Volume Control (High / Mid / Low) (13)
You may adjust the sound volume on the camera at your preferred level.
CAMERA/AUTO Mode Switch (14)
CAMERA
– In this mode, the camera transmits continuously, useful for
continuous monitoring of your child or secured area.
AUTO
– In this mode, the camera monitors your child or the secured area and
triggers the transmission whenever a noise is detected
– subject to the preset
sound level.
This mode is especially useful at night when no device is connected to the
camera as the camera is not transmitting when there is no sound, helping you
to sleep soundly. Whenever a noise is detected, the camera will resume
transmission alerting you to the activities of your child or in the secured area.
When you select this AUTO mode on the camera and if there is no noise
around the camera, it will stop transmitting and may appear to be off but it is
still listening while using the minimum power. The monitor screen will turn off
when the camera is not transmitting.
NOTE:
TO DISABLE THIS
AUTO
FUNCTION
,
SELECT
CAMERA
MODE ON THE CAMERA
.
Night Light (15)
To comfort your baby, the camera includes the night light function for use in
darkness. Simply switch to the ON position to turn on, and OFF to turn off. It
also has the AUTO mode to minimize the use of power. By turning to the AUTO
mode, the night light will automatically turn on as triggered by sound (voice
activation).
Press to Talk (16)
To talk to the baby, press and hold the Talk Button (16) on the monitor. The volume
is adjusted by the Volume Control Button (13) on the camera. After talk, release the
Talk Button and listen to the baby sound again. Please note that by pressing the
Talk Button, you can see all icon symbols displayed on the screen.
