27. DO NOT operate any product with a damaged cord or plug. If your Wireless
Monitor malfunctions or is damaged in any manner, return the Wireless Monitor to an
authorised service facility for examination and repair to avoid a hazard.
28. DO NOT attempt to repair or adjust any electrical or mechanical functions on this
unit as this may void warranty.
29. Check the household voltage to ensure it matches the appliance's rated
specification.
30. Always unplug the charger and remove the batteries if you do not intend to use
your Wireless Monitor for a long period. To disconnect from the power supply, grip the
transformer and pull from the power socket. Never pull by the cord.
31. This product is not intended for use in wet or damp locations. Never locate the
Wireless Monitor or charger where it may fall into a sink or other water container. When
not in use always store in a dry area.
32. If the supply cord is damaged it must be replaced by the manufacturer or an
authorised service centre in order to avoid a hazard.
33. Before you dispose of your Wireless Monitor,
you must remove the batteries and
dispose of them responsibly. Dispose of the batteries and the product responsibly.
BEFORE USE
Choosing a Location
Choose a location for the camera away from televisions, TV signal boosters and
radios. Strong radio signals generated by these products may cause noise or even
retransmitted images on the monitor unit. If this happens, move the camera to a
different location.
Connection of Power Supply
This Wireless Monitor is designed to be powered by either batteries or the supplied
AC/DC adaptors. Rechargeable battery for the monitor unit must be charged for at
least 8 hours before first use. Remember to connect the supplied adaptor or use with
4 x size AA alkaline batteries 1.5V (not supplied) with the camera for power supply.
Using the Batteries
The monitor unit requires a Li-ion rechargeable battery to operate. If
non-approved batteries are used, DO NOT connect the mains adaptor to either the
monitor unit or the camera unit.
Your Wireless Monitor is supplied
with ONE Li-ion rechargeable
battery. We
recommend that this be fitted to the monitor unit so that you can view the monitored
area at any location. Reconnect the monitor to the mains adaptor whenever
possible to maintain the portable viewing facility.
Installing/Removing Batteries
Monitor:
Undo the screw and remove the battery cover at the back of the unit.
Insert
the supplied Li-ion battery in accordance with marking of the battery
compartment.
Refit the battery cover and secure with the screw.
Please note:
When the power LED indicator on the monitor unit starts to blink continuously
and MONITOR BATTERY LOW appears on the screen, i
t’s time to recharge the
battery.
Remove the battery from the unit during long period of non-use.
ATTENTION: When MONITOR BATTERY LOW once appears on the screen, you
cannot operate any functions at all. Please recharge the battery as soon as possible.
Using the Charger:
Plug the connector of the AC/DC adaptor to the DC Power Input (34) at the
back of the charger.
Plug the adaptor into a mains socket and the charger
’s Power LED Light (32)
will turn on.
Check that only approved Li-ion rechargeable battery is installed in the monitor.
Place the monitor onto the charger
’s Charging Contact Point (27)(28) and the
battery is recharging.
Using AC/DC Adaptor on Monitor:
Check that only approved Li-ion rechargeable battery is installed in the monitor.
Plug the connector of the AC/DC adaptor to the DC Power Input (30) on the
monitor.
Plug the adaptor into a mains socket and the battery is recharging.
Switch on the power of the unit to operate.
Camera:
Undo the screw and remove the battery cover at the bottom of the unit.
Insert 4 x size AA alkaline batteries 1.5V (not supplied) in accordance with
marking of the battery compartment.
Refit the battery cover and secure with the screw.
Please note:
When the power LED indicator on the camera unit starts to blink continuously,
i
t’s time to change the batteries. It is advised to use the supplied AC/DC adaptor for
long hour use.
Remove the batteries from the unit during long period of non-use or when the
AC/DC adaptor is in use.
