OPERATION MANUAL
11
UNFOLDING THE STROLLER
In order to unfold the stroller, release the automatic lock (ig. 1),
and pull the stroller guiderail upward until fully unfolded (ig. 2, 3).
ATTACHING AND DETACHING REAR WHEELS
To attach rear wheels you must irst attach the half axles in rear
suspension. Slide the pointed end of the half axle into the opening
in rear suspension (ig. 4). It should automatically click in place.
Then slide the wheel onto the half axle and push until it clicks in
place (ig. 5).
NOTE! Before starting to use the pram, make sure that all the
wheels have been assembled correctly.
To disassemble the rear wheels, press down the button in the
central part of the wheel (Fig. 6) and remove the wheels from the
axle (Fig. 7). To detach the rear half axle push the button in rear
suspension and remove the half axle (ig. 8).
ASSEMBLING AND DISASSEMBLING THE FRONT
SWIVELLING WHEELS
In order to assemble the front wheels, force their axles in the
ends of the front legs, until you hear a characteristic “click” (Fig.
9). In order to disassemble the wheels press down the button at
the upper part of the swivelling mechanism (Fig. 10) and slide the
wheel axle in.
The stroller has swivel wheels, which may be locked in a forward
facing position. In order for the wheels to swivel, twist the knob in
the upper part of the wheel mount in an anti-clockwise direction.
To lock the wheels turn the knob in a clockwise direction (ig. 11).
HANDLE HEIGHT ADJUSTMENT
It is possible to adjust the pram handle height. To perform the
adjustment, press down the round buttons on both sides of the
handle at the upper part, and then adjust the right height (Fig. 12).
PARKING BRAKE
The pram is equipped with a rear parking brake. To engage the
brake, press its lever down (Fig. 13). In order to disengage it, lift
the lever.
NOTE! Before starting to push the pram, make sure that the
brake has been disengaged.
NOTE! Always engage the safety brake, when you leave the
pram on an inclined surface.
NOTE! The brake is not designed for slowing down. It should be
engaged after the pram has been stopped completely.
NOTE! The pram is not designed for running.
ADJUSTING SUSPENSION STIFFNESS
It is possible to adjust the sti ness of the pram’s rear suspension.
The sti ness is adjusted using the lever under the rear suspension
seat the baby, adjust the length of the belts so that they it closely
to the baby’s body, without oppressing it, and then fasten the forks
of all the belts to the central buckle.
The seat has an additional crotch strap which should be attached
to the safety bar using snaps (ig. 26). This is an additional element
and not be a substitute for using the 5 point safety harness.
NOTE! Always use the restraint system, if the baby can sit by
itself.
SAFETY BAR
To attach the bar, insert its tongues into the slots in armrests.
To remove it, push the buttons located on the bottom of the slots
(ig. 27).
The bar is adjustable. You can detach one of its ends and move it
sideways to place the baby inside the carriage (ig. 28).
NOTE: The bar is an extra element and you must still use the
ive-element harness to secure the child.
ADJUSTING THE LEG REST
The pram is equipped with an adjustable leg rest. To move
it to the right position, press down the buttons on its both sides
(Fig. 29).
ADJUSTING THE BACKREST
The seat unit can be adjusted to 4 di erent positions.
To lower the backrest, pull the lever in the rear (ig. 30). To lift the
backrest, push it upwards. It will automatically click into position
(ig. 31).
RAIN FOIL
The pram is provided with a rain foil equipped with an air hole
at the baby’s face height. To assemble it, put one end under the
leg rest or under the carrycot rear, and pull the other end onto
the canopy
(Fig. 32, 33). The foil is suitable both for the deep and stroller
version.
MOSQUITO NET
The carrycot comes with a mosquito net. To put it in place, attach
one end to the inside of the canopy using zips and stretch the
other end over the rear of the carrycot. Attach the sides of the
mosquito net to the canopy using the hook and loop fasteners
(ig. 34).
FOLDING THE STROLLER
Before folding the stroller, remove the child seat or the carrycot.
To fold the stroller frame, push the button on the upper part of the
guide on the right side (ig. 35A), then pull up the levers on both
sides of the guide (ig. 35B) and push them down until total folding
(ig. 36, 37, 38).
(ig. 14). Repeat for both rear wheels. The suspension has two
settings: sti and soft.
EXTRA SHOCK ABSORPTION OF THE BASSINET AND
SEAT UNIT
The baby carriage comes with extra shock absorption system for
the bassinet and seat unit. The shock absorbers are adjustable.
For a irm ride, turn the knob in the lower section of the shock
absorber clockwise. For a soft ride, turn the knob anticlockwise
(ig. 15).
BOTTLE HOLDER
To attach the bottle holder slide it down onto a special hook
located above the handlebar adjustment (ig. 16). The bottle
holder hook is adjustable. Make sure it is always ixed in a position
that will keep the bottle in a vertical position.
ATTACHING AND REMOVING THE CARRYCOT
In order to attach the carrycot press it into the pram frame so that
the adapters on both sides of the carrycot lock onto the catches
on the pram frame (ig. 17). They will lock in place automatically.
ATTENTION! Make sure the carrycot is attached correctly prior
to use. To remove the carrycot press the buttons on the adapters
at the sides of the carrycot (ig. 18) and pull the carrycot upwards.
RECLINING CARRYCOT SUPPORT
The carrycot support is reclinable. To recline it into suitable
position, push and turn the knob located under the carrycot
(ig. 19).
CARRYCOT CANOPY AND HANDLE FOR CARRYING THE
CARRYCOT
The carrycot comes with a canopy. Its frame also doubles up
as a handle for carrying the seat (this is a handle for carrying the
carrycot and not the entire pram).
ATTENTION! Before lifting the carrycot, position it upright
(perpendicular to the ground) whilst holding it by the handle.
The canopy is adjustable. To position the canopy press the round
plastic buttons near its base (ig. 20).
ASSEMBLING AND DISASSEMBLING THE SEAT
The seat should be assembled and disassembled the same
way as for the carrycot (see ATTACHING AND REMOVING THE
CARRYCOT)(ig. 21, 22).
The seat may be assembled with its front and back facing the
movement direction (Fig. 23, 24).
NOTE! Before starting to use the pram make sure that the seat
has been assembled correctly.
RESTRAINT SYSTEM
The seat is equipped with a 5-point restraint system (Fig. 25).
It should be used from the moment a baby starts to sit by itself.
Unfasten the belts, by releasing the forks from the central buckle,