Rigol MSO5000 Series, User Manual

Page: 340 / 358

RIGOL
Chapter 19 System Utility Function Setting
19-16 MSO5000 User's Guide
Group". Press down the knob to select it. You can also press Operation
continuously to select among the options, or enable the touch screen to tap the
desired operation type.
Set the Group parameter: press Group and then rotate the multifunction knob
to select "Save Image", "Save Wave", or "Save Setup". Press down the knob
to select the desired one. You can also press Group continuously or enable the
touch screen to select it. You can select any or all of the three items. The sign
indicates that the item has been selected, and indicates that the item has not
been selected.
Self-check
The oscilloscope supports a variety of self-check functions, including key test, screen
test, and touch test.
Press
Utility

More

Self Check to enter the self-check menu.
1. Key Test
Press Key Test to enter the keyboard test interface (virtual keypad of the front
panel). At this time, you can press the keys on the front panel to check whether
the virtual keys are highlighted. If yes, it indicates that the keys work normally;
if no, it indicates that there's something wrong with the keys. Press
RUN/STOP
for three consecutive times to exit the keyboard test interface.
2. Screen Test
Press Screen Test to enter the screen test interface and check whether the
defective pixel exists. There are 24 screen test interfaces. Press SINGLE to
switch to the next screen test interface. Press RUN/STOP for three consecutive
times to exit the screen test interface.
3. Touch Test
Press Touch Test to enter the touch screen test interface first, as shown in the
figure below. Slide with your finger on the screen. If there is a line displaying at
the empty area where you slide on the screen and the box that you tap turns out
to be filled with green background, it indicates that the touch function of this
area is normal.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com