Rigol MSO5000 Series, User Manual

Page: 121 / 358

Chapter 5 To Trigger the Oscilloscope
RIGOL
MSO5000 User's Guide 5-39
Trigger Condition:
Press When to select the desired trigger condition.

SOF: triggers at the start of a frame.

EOF: triggers at the end of a frame.

Remote ID: triggers on the remote frame with the specified ID. Set the following
parameters:

Press Extended ID to enable or disable the extended ID.

Press Bit X to set the data bit that needs to be operated on. For setting
methods, refer to descriptions in "I2C Trigger (Option)" .

Overload: triggers on the CAN overload frames.

Frame ID: triggers on the data frames with the specified ID. Set the following
parameters:

Press Extended ID to enable or disable the extended ID.

Press Bit X to set the data bit that needs to be operated on. For setting
methods, refer to descriptions in "I2C Trigger (Option)" .

Frame Data: triggers on the data frames with specified data. Set the following
parameters:

Press Bit X to set the data bit that needs to be operated on. For setting
methods, refer to descriptions in "I2C Trigger (Option)" .

Press Bytes , then rotate the multifunction knob or use the numeric
keypad to set the length of the data. Its range is from 1 to 8.

Data&ID: triggers on the data frames with the specified ID and data. Set the
following parameters:

Press Define to select "Data" or "ID".

When you select "Data", set Bit X and Bytes . For detailed settings, refer to
parameter settings for "Frame Data".

When you select "ID", set Extended ID and Bit X . For detailed settings,
refer to parameter settings for "Frame ID".

Frame Error: triggers on the error frame.

Bit Fill: triggers on the error frame with the bit fill.

Answer Error: triggers on the answer error frame.

Check Error: triggers on the check error frame.

Format Error: triggers on the format error frame.

Random Error: triggers on random error frame, such as the format error frame,
answer error frame, etc.
Signal Type:
Press More

Signal Type to select the desired signal type.

CAN_H: indicates the actual CAN_H bus signal.

CAN_L: indicates the actual CAN_L bus signal.

TX/RX: indicates the Transmit signal and Receive signal from the CAN bus
transceiver.

DIFF: The CAN differential bus signals connected to an analog source channel by
using a differential probe. Connect the probe's positive lead to the CAN_H bus
signal and connect the negative lead to the CAN_L bus signal.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com