Rigol DG5071, User Manual

Page: 88 / 228

RIGOL Chapter 4 Common Modulation Output
User’s Guide for DG5000 4-10
default value is 100 Hz.
Notice that, this menu will be grayed out and disabled when external modulation
source is selected.
To Set Phase Deviation
Press Deviation to set the deviation of the modulating waveform phase relative to
the carrier waveform phase.

Input the desired phase using the numeric keyboard or knob.

The phase deviation ranges from 0º to 360º.
When external source is selected, phase deviation is controlled by the ±6 V signal
level of the [Mod In] connector at the rear panel. For example, if the phase deviation
is set as 180º, +6 V signal level corresponds to a 180º phase change. Lower external
signal level generates less deviation.
www. .com
information@itm.com 1.800.561.8187