Rigol DG5071, User Manual

Page: 77 / 228

Chapter 3 Arbitrary Waveform Output RIGOL
User’s Guide for DG5000 3-19
To Edit Arbitrary Waveform
Arbitrary waveforms stored both in volatile memory and non-volatile memories can be
recalled and re-edited.
Press Arb and use
to open the 2/2 menu page, then press Edit Wform to
open waveform editing menu. Note that, only “Select Wform” is new in this menu
compared to Create New, which will be introduced in this section. For other menu
functions and operations, please refer to “
To Edit Arbitrary Waveform”.
Press Edit Wform

Select Wform to select the waveform to be edited.
1.
To Edit Built-In waveforms
Select a waveform from the built-in waveforms to edit. You can store the edited
waveform without overwriting the selected built-in waveform.
2. To Edit Stored Waveforms
Select a waveform from internal non-volatile memory (C Disk) or external
memories (D Disk or E disk) to edit. You can overwrite the old waveform or save it
as a new file.
3. To Edit Waveform in Volatile Memory
Select waveform stored in current volatile memory to edit. The previous data in
the volatile memory would be overwritten by the new waveform data. You can
also save it into the non-volatile memory.
www. .com
information@itm.com 1.800.561.8187