Rigol DG5071, User Manual

Page: 28 / 228

RIGOL Chapter 1 Quick Start
User’s Guide for DG5000 1-6
1. Power Key
The power soft key is used to turn the generator on or off.
2. USB Host
Support FAT file format USB flash device,
RIGOL TMC digital oscilloscope (DS)
and power amplifier (PA).

USB flash device: Read the waveform or state files from the USB flash device,
or store the current instrument state and edited waveform data into the USB
flash device.

TMC DS: Seamlessly interconnect with the
RIGOL
DS that fits the TMC
standard, read and store the waveform data sampled by the DS and display it
nondestructively.

PA (optional): Support the
RIGOL
power amplifier, for example, PA1011.
Enable to be configured online and amplify the signal power before output.
3. LCD
480 × 272 TFT color LCD is used to display the current function menu and
parameters setting, system state and prompt messages.
4. Display Switch
For dual-channel model: Switch between Parameter/Graph display mode.
For single-channel model: not available.
5. Sine
Generate a Sine waveform with frequency from 1 μHz to 350 MHz.

When the function is enabled, the backlight of the button turns on.

Enable to change Frequency/Period, Amplitude/High Level, Offset/Low Level
and Start Phase of the Sine waveform.
6. Square
Generate a Square waveform with frequency from 1 μHz to 120 MHz and variable
duty cycle.

When the function is enabled, the backlight of the button turns on.

Enable to change Frequency/Period, Amplitude/High Level, Offset/Low Level,
Duty Cycle and Start Phase of the Square waveform.
www. .com
information@itm.com 1.800.561.8187