Rigol DG5071, User Manual

Page: 15 / 228

RIGOL
User’s Guide for DG5000 XIII
Document Overview
Chapter 1 Quick Start
This chapter introduces the front/rear panel, user interface and main functions, as
well as announcements during first use of the instrument.
Chapter 2 Basic Waveform Output
This chapter introduces how to output basic waveforms, e.g. Sine, Square etc.
Chapter 3 Arbitrary Waveform Output
This chapter introduces how to output built-in or user-defined waveforms.
Chapter 4 Common Modulation Output
This chapter introduces how to output common modulated waveforms, e.g. AM, FSK,
PWM etc.
Chapter 5 IQ Modulation Output
This chapter introduces how to implement IQ modulated waveform output.
Chapter 6 Frequency Sweep Output
This chapter introduces how to generate a frequency Sweep.
Chapter 7 Burst Output
This chapter introduces how to generate a Burst waveform.
Chapter 8 FH Output
This chapter introduces how to implement frequency hopping output.
Chapter 9 Store and Recall
This chapter introduces how to store and recall the waveform data and the instrument
state settings.
Chapter 10 Advanced Operations
This chapter introduces the advanced operations of the instrument, including system
parameters setting, waveform saving and printing, functions expansion and the
remote control interfaces configuration.
Chapter 11 Remote Control
This chapter introduces how to control the instrument through remote mode.
Chapter 12 Troubleshooting
This chapter lists commonly encountered failures that may appear during the use of
the generator and their solutions.
www. .com
information@itm.com 1.800.561.8187