Rigol DG5071, User Manual

Page: 196 / 228

RIGOL Chapter 10 Advanced Operation
User’s Guide for DG5000 10-42

Press ManualIP to select “On” or “Off” to turn ManualIP mode on or off. To
enable this mode, set DHCP and AutoIP as “Off”.

The IP format is nnn.nnn.nnn.nnn. The first nnn ranges from 0 to 223
(except 127) and the other three nnn range from 0 to 255. We recommend
that users acquire an available IP from your network administrator.

Press IP Address and use the numeric keyboard and direction keys to enter
your desired IP. The setting is stored in the non-volatile memory and will be
loaded automatically when the generator is powered on the next time if
DHCP and AutoIP are set as “Off”.
Tips

If all the three IP configure modes are “On”, the priority of parameters
configuration from high to low is “DHCP”, “AutoIP” and “ManualIP”.

The three IP configure modes cannot be set as “Off” at the same time.
www. .com
information@itm.com 1.800.561.8187