Rigel VP3500 User Manual Download Page 82

Page: 82 / 97

5.1.1 : Power OK LED

The Power OK led is illuminated when all of the on-board power supplies are operating within

specification. The VP3500 generates all its required on-board power from VPX +12V and +5V.

5.1.2 : GbE Switch LEDS

There are 5 GbE ports on the VP3500, four of which are routed to the VPX backplane and comply with

VITA 46.6 routing. The fifth is also routed to the backplane and may be used as a general-purpose GbE

port.

The table below defines the GbE port LED functionality.

GbE LEDs

GbE Port 0 1Gb Link

(VITA 46.6 1000BASE-T)

Green. This LED indicates port 0 of the Ethernet switch has

established a 1Gb link.

GbE Port 0 100Mb Link

(VITA 46.6 1000BASE-T)

Yellow. This LED indicates port 0 of the Ethernet switch has

established a 100Mb link.

GbE Port 0 Activity

(VITA 46.6 1000BASE-T)

Green. This LED indicates port 0 of the Ethernet switch is currently

transmitting or receiving data.

GbE Port 1 1Gb Link

(VITA 46.6 1000BASE-T)

Green. This LED indicates port 1 of the Ethernet switch has

established a 1Gb link.

GbE Port 1 100Mb Link

(VITA 46.6 1000BASE-T)

Yellow. This LED indicates port 1 of the Ethernet switch has

established a 100Mb link.

GbE Port 1 Activity

(VITA 46.6 1000BASE-T)

Green. This LED indicates port 1 of the Ethernet switch is currently

transmitting or receiving data.

GbE Port 2 1Gb Link

(GP GbE routed to VPX P6)

Green. This LED indicates port 2 of the Ethernet switch has

established a 1Gb link.

GbE Port 2 100Mb Link

(GP GbE routed to VPX P6)

Yellow. This LED indicates port 2 of the Ethernet switch has

established a 100Mb link.

GbE Port 2 Activity

(GP GbE routed to VPX P6)

Green. This LED indicates port 2 of the Ethernet switch is currently

transmitting or receiving data.

GbE Port 4 Link/Active

(VITA 46.6 1000BASE-BX)

Green. This LED when on indicates a successful Gb link. When it

flickers the link has activity.

GbE Port 5 Link/Active

(VITA 46.6 1000BASE-BX)

Green. This LED when on indicates a successful Gb link. When it

flickers the link has activity.

GbE Int

Yellow. This LED indicates an unmasked interrupt event occurred.

Please reference the Marvel 88E6165 specification for further details.

Table 42 : GbE LEDs

VP3500 User Manual • Document Number 101-3500-0001 • Revision A0

Property of Rigel Engineering, LLC. Confidential & Proprietary

690 Cone Park Court, Merritt Island, Florida 32952

page 82

Summary of Contents for VP3500


































































































Search results

Summary of Contents for VP3500

Reviews:

Related manuals for VP3500

Brands by name

Popular brands

Rigel VP3500, User Manual

Search results

Summary of Contents for VP3500

Reviews:

Related manuals for VP3500

Brands by name

Popular brands