Rigel VP3500 User Manual Download Page 17 | Manualshive

Page: 17 / 97

background image

1.5.3 : MiniPCIe Rear IO Adapter

One of the challenges of using MiniPCIe cards is the lack of a standard for accessing the card’s IO signals. The

VP3500 has addressed this by providing a custom adapter card that bridges the MiniPCIe’s IO signals to the VPX

backplane. The adapter card connectors are located near the IO end of the MiniPCIe sockets and are secured to

the VP3500 heat frame via screws.

The adapter cards provide the connector(s) that match your MiniPCIe’s IO connector(s) and plug onto the

VP3500, routing the signals to the VPX backplane. Each adapter is custom-designed to match the MiniPCIe IO

connector(s). The VP3500 routes 20 differential signal pairs with 8 single-ended signals for each MiniPCIe socket.

Please contact Rigel Engineering for additional information, or to have an adapter designed for your application.

Please refer to section 3.7 for additional information.

1.5.4 : Rear Transition Module

Rigel Engineering offers a rear transition IO module with industry-standard connectors for the board’s backplane

IO access. Rigel Engineering will also provide a quick-turn custom rear transition IO module for your requirements.

The standard rear transition module (RT3500-0000) provides access to the following IO:

•  VP3500 Momentary reset switch
•  VP3500 Momentary power up/down switch
•  Microcontroller emulator header
•  Microcontroller serial port connector
•  Three VPX user-defined LVTTL IO
•  Three microcontroller user-defined LVTTL IO
•  Twenty MiniPCIe 1 differential signal pairs
•  Eight MiniPCIe 1 single-ended signals
•  Twenty MiniPCIe 2 differential signal pairs
•  Eight MiniPCIe 2 single-ended signals
•  Sixty four PMC/XMC 1 single-ended signals
•  Sixty four PMC/XMC 2 single-ended signals
•  Twenty XMC 1 differential signal pairs
•  Twenty XMC 2 differential signal pairs
•  Two Small Form Factor Pluggable GbE modules
•  Three 10/100/1000 GbE RJ-45 modules

VP3500 User Manual • Document Number 101-3500-0001 • Revision A0

Property of Rigel Engineering, LLC. Confidential & Proprietary

690 Cone Park Court, Merritt Island, Florida 32952

page 17

«
...
15
16
17
18
19
...
»

Summary of Contents for VP3500


































































































Reviews:

No comments

Related manuals for VP3500

Brand: ABLE Pages: 5

D-PFS4226-24ET-240

Brand: Dahua Pages: 58

ATLONA Omega AT-OME-MS52W

Brand: Panduit Pages: 123

Atlona AT-OME-MS42

Brand: Panduit Pages: 86

M800 Elite Series

Brand: 4B Pages: 12

Brand: Intermatic Pages: 1

PC-IA100 Series

Brand: Barox Pages: 7

Brand: ALFAtron Pages: 68

Brand: enbrighten Pages: 2

Brand: WTI Pages: 56

Tek-CARE NC554/8

Brand: TekTone Pages: 2

Brand: H3C Pages: 39

Sun Datacenter InfiniBand Switch 36

Brand: Sun Oracle Pages: 12

Brand: Altusen Pages: 2

LANPLEX 2500 EXTENDEDPLEX 2500 EXTENDED

Brand: 3Com Pages: 186

Brand: SALZ Pages: 2

Brand: Tripp Lite Pages: 8

SuperStack 3 3C17204

Brand: 3Com Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands