Rigel VP3500 User Manual Download Page 32

Page: 32 / 97

RTM_UD1

This GPIO pin is user defined. It is pulled up to 3.3V through an 8.2K resistor and connected to

microcontroller pin 47. Default as an input.

RTM_UD2

This GPIO pin is user defined. It is pulled up to 3.3V through an 8.2K resistor and connected to

microcontroller pin 38. Default as an input.

RTM_UD3

This GPIO pin is user defined. It is pulled up to 3.3V through an 8.2K resistor and connected to

microcontroller pin 37. Default as an input.

DPx

These signals are the 16 differential PCIe lanes that make up the VP3500’s VPX data plane. The default

configuration for the data plane is a 4x4 but may be configured as 1x16 or 2x8 as well. The ports will

also auto negotiate to fewer lanes if the full port width is not supported. See section 5.3 for configuration

options.

DP1

The 4 -lane PCIe Port (FAT Pipe) connected to PCIe switch port 4 (in 4x4 configuration)

DP2

The 4-lane PCIe Port (FAT Pipe) connected to PCIe switch port 5 (in 4x4 configuration)

DP3

The 4-lane PCIe Port (FAT Pipe) connected to PCIe switch port 6 (in 4x4 configuration)

DP4

The 4-lane PCIe Port (FAT Pipe) connected to PCIe switch port 7 (in 4x4 configuration)

VP3500 User Manual • Document Number 101-3500-0001 • Revision A0

Property of Rigel Engineering, LLC. Confidential & Proprietary

690 Cone Park Court, Merritt Island, Florida 32952

page 32

Summary of Contents for VP3500


































































































Search results

Summary of Contents for VP3500

Reviews:

Related manuals for VP3500

Brands by name

Popular brands

Rigel VP3500, User Manual

Search results

Summary of Contents for VP3500

Reviews:

Related manuals for VP3500

Brands by name

Popular brands