Riello Family PRO 42 IS Installation & Operating Instructions For Contractors Download

Page: 1 / 76

. 2

4 r

12/

Scan the QR code for the latest

edition of this manual

Family PRO 42 KIS-IS

INSTALLATION & OPERATING INSTRUCTIONS FOR CONTRACTORS

WARNING:

If the information in this manual

is not followed exactly, a fire or explosion

may result causing property damage,

personal injury or loss of life.

Do not store or use gasoline or other flammable

vapors and liquids or other combustible

materials in the vicinity of this or any other

appliance. To do so may result in an explosion

or fire.

WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

- Do not touch any electrical switch; do not

use any phone in your building.

- Immediately call your gas supplier from a

neighbor’s phone. Follow the gas supplier’s

instructions.

- If you cannot reach your gas supplier, call the

fire department.

Installation and service must be performed by

a qualified installer, service agency or the gas

supplier.

This manual should be maintained in legible

condition and kept adjacent to the boiler or in

a safe place for future reference.

Summary of Contents for Family PRO 42 IS













































































Search results

Summary of Contents for Family PRO 42 IS

Reviews:

Related manuals for Family PRO 42 IS

Brands by name

Popular brands

Riello Family PRO 42 IS, Installation & Operating Instructions For Contractors

Search results

Summary of Contents for Family PRO 42 IS

Reviews:

Related manuals for Family PRO 42 IS

Brands by name

Popular brands