Riello Aaria Mono Plus AMK P Series, User Instructions

Page: 21 / 28

21
USE
1 Mesh filters
1
— open the front panel
— take out the mesh filter by grabbing the relevant fins
— remove exhausted purifying filters if present
— remove dust with an vacuum cleaner
9
Stubborn dirt can be removed by washing the filter in a luke
warm (max. 40°C) solution of water and neutral detergent.
After washing, rinse the filters well and leave to dry in the
shade.
9
Exposing the filters to the sun or washing them with water
at a temperature that is higher than 40 °C can cause the
filters to shrink.
0
It is forbidden to use the device without mesh filter.
Purifying filter replacement
The cleaning of the purifying filters, if present, allows the opti-
mal operation of the air conditioner and guarantees the quality
of the treated air.
To replace the filters:
1 Mesh filters
1
— open the front panel
— take out the mesh filter by grabbing the relevant fins
1 Mesh filters
2 Air purifying filter
2
1
— remove exhausted purifying filters
— insert new purifying filters into the prearranged slots
—
to reposition them, proceed in reverse order
9
Keep the purifying filters sealed until their actual use.
9
Installing the purifying filters reduces the air flow and re-
sults in lower performance. It is advised to use the device at
the highest speeds.