Riello Aaria Mono Plus AMK P Series, User Instructions

Page: 13 / 28

13
USE
2.2 Start-up
To switch on:
ON
OFF
— position the system's main switch in the "ON" position.
— press
The unit display turns on.
9
Use the remote control within a range of 7 meters, pointing
it towards the receiver and making sure that there are no
obstacles interposed.
9
The working range could be reduced if electronic starters or
TV sets are nearby.
9
Do not leave the remote control exposed to direct sunlight,
near sources of heat and protect it from water and dust.
9
The remote control is equipped with 1.5 V AAA batteries that
must be removed when climate control system is left un-
used for over 3 months.
9
The compressor activates 3 minutes after unit activation.
2.3 Use with closed flap
DooR CloSED
1 Display
2 On- Off key
3 Quick function keys
POWER
TIMER
1
2
3
When the door is closed, you can activate the quick functions,
such as choosing the operating mode and setting the desired
temperature.
9
Ensure that the door is fully closed. If this is not the case, the
external keys will not work.
Cooling mode
The Cooling mode allows starting and use of the air condition-
er as a producer of cold and dehumidified air. To activate this
function an external temperature b10 ° C and 46 ° C is
recommended.
Required ambient temperature available range is between 16 °C
and 30 °C.
• Activation
— press
appears on the display of the remote control and the unit.
Set required temperature as follows:
—
work on
Value is stored with no need to press other buttons.
•
Switch-off
— select another operating mode
Alternatively:
— press to deactivate
Heating Mode
The Heating mode allows starting and use of the air conditioner
as a hot air producer. To activate this function an external tem-
perature between -25 ° C is recommended, for AMW P, -15 ° C, for
AMW ST, and 16 ° C.
Required ambient temperature available range is between 16 °C
and 30 °C.