Riello Aaria Mono Plus AMK P Series, User Instructions, Page: 16 / 28

16
USE
A Cooling and Dehumidification mode
B Heating Mode
C Smart mode
D Initial position
A
B
C
D
—
work on
— select required position
Each press will select a different position.
If is selected, the position automatically changes accord-
ing to predefined logics from the program.
9
In environments with high humidity, condensation may
form on the deflector during operation in Cooling and
Dehumidification mode. In this situation, if the deflector is
kept in vertical position
for a long time, condensation
may fall on the objects below.
9
Do not set under the equipment any objects susceptible to
get damaged in contact with water.
9
When climate control system is turned off, the horizontal
deflector will close automatically.
0
Do not manually move the deflector.
Vertical motorised deflector
The vertical motorised deflector controls the horizontal air flow
by setting a preferred outlet tilt or activating automatic opera-
tion (not available on AMW ST).
Set required deflector position as follows:
A Initial position
A
— work on
— select required position
Each press will select a different position.
If is selected, the position automatically changes accord-
ing to predefined logics from the program.
0
Do not manually move the deflector.
Ventilation mode
The Fan mode allows the user to turn on only the fan, so as to
recirculate and filter ambient air.
• Activation
— press FAN MODE
The display shows the and the temperature value disappears.
9
The equipment will operate at selected ventilation speed.
9
During operation in Ventilation mode, automatic sped can-
not be selected.
•
Switch-off
— press or
disappears in the display of the remote control
Sleep function
The Sleep function allows user to select a time period through-
out which the equipment will change reference ambient tem-
perature: