18
USE
The display shows the
and the temperature value disappears.
9
The equipment will operate at selected ventilation speed.
9
The equipment will operate to keep room temperature at
10 °C.
•
Switch-off
—
press
disappears in the display and the temperature value appears.
Switching unit display off or on
If required, indoor unit display can be turned off or on.
AMW P
1
Display
1
AMW ST
1
Display
1
—
work on
Each pressure turns display off or on.
Hourly programming
Hourly programming allows user to set equipment on and off
times.
Switch-on occurs in the current operating mode.
Automatic switch-on
Automatic switch-on programming allows user to set equip-
ment ON time.
9
before activation, set current time.
TIMER
•
Activation
—
aim the remote control on the side opposite to unit re-
ceiver
—
press
The remote control turns on.
—
aim the remote control to unit receiver
—
press
The display shows the
intermittent and the time previously
set.
Set required time as follows:
—
work on
Each time the key is pressed, the values changes by 1. by keeping
the key pressed down, the value changes faster.
—
confirm with
The symbol ends intermittently.
•
Switch-off
—
press in sequence
until all the indications relative to
the time programming have disappeared
9
The set time is memorized by the remote control and ap-
pears every time
is pressed.
9
Programming remains active even when remote control is
off.
Automatic switch-off
Automatic switch-off programming allows user to set equip-
ment OFF time.
9
before activation, set current time.
TIMER
•
Activation
—
press in sequence
until the intermittent
appears
Remote control display shows previously set time.
Summary of Contents for Aaria Mono Plus AMK P Series
Page 27: ......